| Manufacturer | Vermeer |
| Model | HG6000E Horizontal Grinder |
| Category | Recycling, Renewable Energy, Wood Waste |
| Price | Request a Quote |
| Year | 2024 |
| Maximum Length - Transport with Dolly | 45.8ft (14m) |
| Maximum Length (Operation) | 54.5ft (16.6m) |
| Maximum Width Transport - with Dolly | 9.8ft (3m) |
| Weight | 56000lbs (25401.2kg) |
| Tongue Weight - Engine Option 1 with Dolly | 21600lbs (9797.6kg) |
| Axle Weight - Engine Option 1 with Dolly | 43400lbs (19685.9kg) |
| Dolly Weight | 9500lbs (4309.1kg) |
| Weight | 55500lbs (25174.4kg) |
| Rear Pad Weight | 31600lbs (14333.5kg) |
| Front Pad Weight | 23900lbs (10840.9kg) |
| Manufacturer | WEG W22 |
| Frame | 145T |
| Horsepower | 2hp (1.5kw) |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1750rpm |
| Enclosure | TEFC |
| Full Load Amps | 2.61 |
| Locked Rotor Amps | 19.6 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 5.9ft-lb (8Nm) |
| Locked Rotor (%) | 240 |
| Break Down | 300 |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 86.5 |
| Power Factor | .84 |
| Approximate Weight | 51lbs (23.1kg) |
| Added Items | Terminal Block |
| Manufacturer | WEG W22 |
| Frame | 364/5TS |
| Horsepower | 60hp (44.7kw) |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1775rpm |
| Enclosure | TEFC |
| Full Load Amps | 68.3 |
| Locked Rotor Amps | 451 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 175ft-lb (237.3Nm) |
| Locked Rotor (%) | 240 |
| Break Down | 260 |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 95 |
| Power Factor | .87 |
| Approximate Weight | 869lbs (394.2kg) |
| Added Items | Nema C Face Mount, Terminal Block |
| Manufacturer | WEG W22 |
| Frame | NEMA 586/7Z |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1790rpm |
| Enclosure | TEFC |
| Full Load Amps | 401 |
| Locked Rotor Amps | 2390 |
| Service Factor | 1.15 |
| Duty Cycle | S1 |
| NEMA Design | NEMA A |
| Insulation Class | F |
| Full Load Torque | 1373ft-lb (1861.5Nm) |
| Locked Rotor (%) | 220 |
| Break Down | 260 |
| Ambient Temperature | 4c (135.2f) |
| Nominal Efficiency | 95.8 |
| Power Factor | .85 |
| Approximate Weight | 3363lbs (1525.4kg) |
| Added Items | Temperature switch; Inverter duty; Terminal Block |
| Drive Belt Type | Synchronous, carbon fiber |
| Height | 87.4in (222cm) |
| Width | 158in (401.3cm) |
| Depth | 24.1in (61.2cm) |
| Weight | 4100lbs (1859.7kg) |
| Feed Table Width | 60in (152.4cm) |
| Feed Table Length - Option One | 20ft (6.1m) |
| Loading Height | 7.6ft (2.3m) |
| Flare Construction | Integrated with infeed |
| Feed Conveyor Type | Welded slat chain |
| Material Construction | Steel |
| Drive Type | Radial piston motor |
| Drive Roller Construction | Welded steel |
| Front Idler Roller Construction | Self-cleaning steel auger |
| Infeed Floor Construction | Welded steel with replaceable UHMW wear plates |
| Infeed Roller Width | 56.8in (144.3cm) |
| Infeed Roller Weight | 1300lbs (589.7kg) |
| Infeed Roller Diameter | 36.1in (91.8cm) |
| Maximum Feed Height | 32in (81.3cm) |
| Material Type | Fabricated steel |
| Tooth Design | Serrated bars |
| Number of Teeth | 13 bars |
| Drive Motor | Fixed displacement, Geroler |
| Drive Planetary | Two options (HD - 26.18:1) (STD - 34.2:1) |
| Feed Roller Down Pressure | Adjustable |
| Thrown Object Deflector | Standard |
| Deflector Position | Variable |
| Millbox Opening | 60" W x 32" H (152.4 cm W x 81.3 cm H) |
| Drum Diameter | 5600in (14224cm) |
| Tip Diameter | 28in (71.1cm) |
| Drum Cutting Width | 36.4in (92.5cm) |
| Drum Skin Thickness | 62.4in (158.5cm) |
| Drum Speed | 1.5rpm |
| Tip Speed | 1080rpm |
| Bearing Type | Double row, spherical roller |
| Bearing - Inner Race Diameter | 5.5in (14cm) |
| Number of Hammers | 10 |
| Number of Tips | 20 |
| Center Retention Pin Dimensions | 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) |
| Screen Weight | 470lbs (213.2kg) |
| Screen Dimensions | 3/4" (1.9 cm) thick |
| Screen Type | Fabricated out of abrasion resistant steel |
| Number of Screens | 2 |
| Screen Area | 3317sq in (21400sq cm) |
| Number of Sides | 1 |
| Millbox Lid Liner Dimensions | Abrasion resistant steel |
| Liner Dimensions | 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) |
| Anvil Type | Fabricated steel with replaceable wear surfaces |
| Anvil Dimensions | 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) |
| Length | 81.3ft (24.8m) |
| Width | 48in (121.9cm) |
| Belt Design | 3 ply - 330# or straight warp single ply 330# both with V cleat |
| Splice | R2-stainless steel or Super splice |
| Return Roller Quantity | 3 |
| Idler Roller Diameter | 12in (30.5cm) |
| Idler Roller Bearing | 1-15/16, 4-bolt flange |
| Standard Drive Roller Diameter | 12.8in (32.4cm) |
| Magnetic Drive Roller Diameter | 12.8in (32.4cm) |
| Drive Motor | Fixed displacement, Geroler |
| Drive Motor Bearings | 1-15/16, 4-bolt flange |
| Belt Speed | 780ft/min (237.7m/min) |
| Load Height | 14.5ft (4.4m) |
| Tank capacity | 65gal (246.1L) |
| Recommended Oil | Vermeer HyPower 68 |
| Filtration Method | Dual in-tank return filters with suction strainer |
| Number of Coolers | 1 |
| System Type | Open-loop, pressure- and flow-compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 28.5/27.3 (60Hz/50Hz) |
| System Relief Pressure | 4500 |
| System Type | Open-loop |
| Pump Type | Fixed displacement, gear pump |
| Pump Flow at Maximum RPM | 23gpm (87.1L/min) |
| System Relief Pressure | 3000 |
| Motor Series | Char-Lyn 6000 Series, geroler |
| System Voltage | 24V Machine Control Circuit |
| System Protection | Fused |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Moisture-proof, toggle style |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Sealed membrane |
| Operating Range | Up to 300' (91.4 m) |
| Battery Type | AA (qty 6) |
| Channel Setting | 50 channels |
| Frame Description | Unit body construction |
| Tongue Description | Bolt-on to infeed structure |
| Hitch Type | Fifth wheel |
| Fender Description | Formed steel, Replaceable |
| Brake Type | Air-actuated with spring-applied parking brake |
| Trailer Light Type | 12-24 V LED |
| Suspension Type | Air-ride |
| Manufacturer - Option One | Hendrickson |
| Capacity per Axle | 20000lbs (9071.8kg) |
| Number of Axles | 3 |
| Tires - Option One | 255/70R22.5 Duals |
| Wheels - Option One | 22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel |
| Ground Clearance - Option One | 5.3in (13.5cm) |
| Air Compressor Brand | Mi-T-M |
| Maximum Pressure | 175psi (12.1bar) |
| Maximum Air Flow | 29cfm (.8cmm) |
| Tank capacity | 30gal (113.6L) |
| Screens | Yes |
| Special Tools Group | Yes |
| Extended Warranty | Yes |
| Preventative Maintenance | Optional |
| Special Paint | Yes |
