Vermeer VXT Series Vacuum Excavators

We pride ourselves on truck vacuum equipment and technology that are among the best in the world. All components in models like our VXT500, with its 8-yd spoil tank capacity, are market-tested and some of the highest quality in the industry.

Vermeer VXT300

The VXT300 series of truck vacs is designed for contractors focused on fast and reliable vacuum excavation from jobsites to dumpsites. The VXT300 series is available in an 8-yd³ (6.1-m³) spoil tank capacity with 800-gal (3,028-L) water tank capacity. Meet project deadlines using the productive 6-in (15.2-cm) PTO-driven truck vac with 3,500-cfm (99.1-m³/min) “free air” and is capable of 18 in Hg (.6 bar).

10gpm (37.9 L/min) high pressure pump flow rate
75 ft (22.9 m) high pressure hose length
Electronic display with 7-in (17.8-cm) LCD screen gauge
335-degree boom rotation
Full-function wireless remote control (optional belly pack or handheld)

Vermeer VXT500

The VXT500 truck vac has 8-cu yds of debris capacity and 850-gallons of water. The truck’s engine, through an OMSI soft start transmission, powers a 4,800-cfm @ 27 hg vacuum blower and 13-gpm @ 3000-psi water system. The 54,000 GVWR rated axle configuration allows for maximum utilization of the 8-yd spoil tank.

3 rear axles for maximum load
Lifting cylinder – full radius half-moon rear door, 10-degree slope floor
18-ft boom with 8-in hose with extended pivot
OMSI transmission with soft-start blower engagement
SCANRECO rocket wireless remote transmitter/receiver for reliable connectivity

Vermeer VXT600

Two VXT600 models offer two different tank sizes. Choose from an 11-cu yd debris tank with 1,300-gal water capacity or a 16-cu yd debris tank with 2,400-gal of water capacity in the central tank. Both sizes feature a built-in 10-degree floor slope along with a three-stage lift cylinder and a full radius half-moon rear door for efficient unloads. They also feature the powerful Jurop Helix 6400-cfm PD Blower driven by the OMSI transfer case with blower soft-start engagement.

1,300-gal or 2,400-gal water tank
6400 cfm @ 27 hg
OMSI 500-hp T-Case with clutch packs
Easy Kleen 420K BTU diesel fired boiler
SCANRECO rocket flex remote
Pratissoli 4000-psi @ 19.2-gpm water pump
IFM can bus control/monitoring system
10-in air system throughout
ICS dual silencers for quiet operation
10-degree slope floor with hoist cylinder
23-ft to 30-ft boom reach with 8-in hose system
Heated cabinets and water tanks

Vermeer VXT600D

This innovative hydro vac solution features a “Detachable Box.” Designed for efficiency, this unit utilizes its boom a a vacuum source that can fill or unload containers while the hoist can be used to unload and pick up containers repeatedly – all while remaining at the job site. The VXT600D is specifically designed for service companies that deal with vacuum boxes and run hundreds of feet of hose to get to the work area.

Galbreath 60,000 pd hydraulic hoist
20-, 25- and 30-cu yd vacuum boxes
Pratissoli water pump – 19 gpm @4000 psi
800-gal aluminum water tank
Multiple chassis configurations available
Easy Kleen 420K BTU diesel, 12V DC boiler
VXP dual silencers, cyclone and filter housing
10 in vacuum system including boom hose
OMSI PFT-PCV/3000 clutch pack blower engagment
6400 cfm @ 27 hg
Optional centrifugal pump for dewatering
Sandblasted, primed and powder-coated
Uses normal or dewatering vacuum boxes